Mark-10 Series R07 Tension and Compression Force Sensors 500 lbF / 2500 N MR07-500 Wire / Rope / Yarn / Tubing Note: An AC1083 Adaptor is

Note: An AC1083 Adaptor is required to use FS05 force sensors with the following test frames: F755

Commonly used with the G1001 wire terminal grip

(1) Additional column cap with hardware (TSFH)

Accuracy - Max Permissible error 2

100 lbF / 1600 ozF / 50 kgF / 50000 gF / 500 N

Mark-10 Series R07 Tension and Compression Force Sensors 500 lbF / 2500 N MR07-500 Wire / Rope / Yarn / Tubing Note: An AC1083 Adaptor isMark 10 R07 Tension and Compression Force Sensors Series MR07 force sensors measure tension and compression forces, and are designed for Series F test frames. With Plug & Test technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off site with a Mark 10 indicator. Ranges available from 50 to 1,500 lbF [250 N to 7. 5 kN]. Compatible with Models F755, F755S, F1505, and F1505S